カメラ映像の解析処理はブラウザ内で行います。映像ファイルをアップロードするものではありません。ただし、ページ表示のため広告・アクセス解析タグは読み込まれます。Camera analysis runs in your browser. This tool does not upload video files. However, ads and analytics tags may load for page operation.
人の顔、個人情報、未公開資料、画面内の機密情報が映らないよう注意してください。終了時は「停止」を押すとカメラ利用を停止します。Avoid showing faces, personal information, unpublished materials, or confidential information on screen. Use “Stop” to stop camera use when finished.
Fは「ちらつきそのもの」ではなく、カメラ映像上の明るさ変動の簡易指標です。端末FPS・露出制御・シャッター・照明PWMに強く影響されます。F is not flicker itself. It is a simple camera-based brightness-variation indicator affected by device FPS, exposure control, shutter behavior, and PWM lighting.
撮影・配信前の照明比較にCamera lighting check before shooting or streaming
ライトを近づける・離す、左右へ動かす、色味を変えるなど、照明Aと照明Bの差を同じカメラ・同じ構図で比べる用途に向いています。Use the same camera and framing to compare lighting A vs. B after moving a light, changing distance, or adjusting its color.
表示するB/C/S/Fは絶対値の測定ではありません。撮影・配信・ビデオ通話などで「どちらの照明条件がよいか」を比較するための相対指標です。B/C/S/F are relative indicators, not calibrated measurements. They are intended to help compare lighting choices for video shoots, streaming, or video calls.
—
—
詳細(任意)Details (optional)
- 「開始」を押して、カメラの利用を許可します。Tap “Start” and allow camera access.
- 同じ構図のまま照明条件を変えます。Change lighting while keeping framing the same.
- B/C/S/Fの変化を比較します。Compare changes in B/C/S/F.
使い方How to use
- 「開始」でカメラが起動します。
- 終了時は「停止」でカメラ利用を停止します。
- ブラウザやOSにより、権限表示がしばらく残る場合があります。
- “Start” starts the camera.
- Use “Stop” to stop camera use when finished.
- Depending on your browser or OS, the permission indicator may remain visible for a while.
制限事項Limitations
- 照度計、色温度計、フリッカーメーターの代替ではありません。
- 業務撮影、医療、建築照明、労働安全、検査用途では専用機器を使ってください。
- Not a replacement for a lux meter, color temperature meter, or flicker meter.
- Use dedicated equipment for professional shooting, medical, architectural lighting, workplace safety, or inspection use.
撮影・配信の照明を比べるときの見方How to compare lighting for shooting and streaming
比較するときは、できるだけ同じカメラ・同じ構図・同じ被写体位置を保ち、ライトの距離や向き、拡散などを一度に1つずつ変えると差を見やすくなります。Light Checkはその前後をB/C/S/Fの4つの相対指標で見比べるためのツールです。For a useful comparison, keep the same camera, framing, and subject position where possible, then change one lighting condition at a time such as distance, angle, or diffusion. Light Check helps compare the before/after result with four relative B/C/S/F indicators.
- B(明るさ):映像全体が相対的に暗いか明るいかを見る目安です。B (Brightness): a relative guide to how dark or bright the camera image appears.
- C(色かぶり):暖色・寒色方向への偏りを比較する目安です。色温度を直接測定しているわけではありません。C (Color cast): compares warm/cool bias. It does not directly measure color temperature.
- S(コントラスト):明暗差や影の強さを相対比較する目安です。S (Contrast): a relative guide to tonal contrast and shadow strength.
- F(明るさ変動):フレーム間の明るさの揺れを見る簡易指標です。端末FPS、露出制御、シャッター挙動、PWM調光などの影響を受けます。F (Brightness variation): a simple frame-to-frame brightness-variation indicator affected by FPS, exposure control, shutter behavior, and PWM dimming.
B/C/S/Fは比較用の目安で、lux・色温度・フリッカー周波数などの校正値ではありません。業務撮影、建築照明、労働安全、検査などで数値保証が必要な場合は専用計測器を使用してください。B/C/S/F are comparison guides, not calibrated lux, color-temperature, or flicker-frequency measurements. Use dedicated instruments when professional, architectural, safety, or inspection work requires validated measurements.
FAQ
Q. 何に使うツールですか?Q. What is this tool for?
Q. luxを測れますか?Q. Can it measure lux?
Q. カメラ映像はアップロードされますか?Q. Is camera video uploaded?
Q. フリッカーを正確に測れますか?Q. Can it measure flicker accurately?
Q. 業務用の照明検査に使えますか?Q. Can it be used for professional lighting inspection?
本ツールがお役に立ちましたら、任意でご支援いただけます。運営・改善の継続に活用いたします。If this tool is helpful, optional support is appreciated. It helps maintain and improve the service.